Jette JOLINO Manual Del Usuario página 11

All manuals and user guides at all-guides.com
GB
Attach / remove the canopy:
Attach the two plastic clips (fig. 6a) onto the canopy on the frame. Addi-
tionally, attach the Velcro strips to the tube slider (fig. 6b).
Now you can unfold the canopy. To remove the canopy, repeat the process in
the reverse order.
Attention: Always fold the canopy before you fold the stroller up.
Fold the stroller:
Close the canopy and put the back rest in an upright position.
Push the lower locking (fig. 7a) up with your foot and subsequently step on
the safety latch (fig. 7b).
Now fold the stroller forwards and hook the safety latch back in place (fig.
1).
To fold the slider handle, move the cover cap outwards (Fig.8a) and the un-
derlying release button inward (Fig. 8b).
To fold the rear wheels, repeat the same process. However, to be observed
that a folding of the rear wheels is only possible when both rear wheels are
unlocked at the same time since they are connected to each other by the
brake rod.