Control Panel - Schwarzwald-Lab AP1207 Manual De Instrucciones

SET UP & USE

CONTROL PANEL

MODEL AP1207
Press the SPEED button repeatedly to scroll though LOW, MEDIUM, HIGH and SLEEP
settings. When in sleep mode, the fan will operate at low speed. Only the On and the (^)
lights will be illuminated.
Press the LOCK S button for 3 seconds to turn on the child lock function. When the icon
flashes the child lock is activated so that the settings cannot inadver- tently be changed.
Press the LOCK button again to turn the child lock off. When the icons are illumi- nated, the
child lock function in not activated.
Press the TIMER (bu button to scroll through the number of hours (1H, 2H, 4H, 8H) and select the
number of hours for the air purifier to shut off.
|l
REPLACE FILTER Indicator Light
After 2,000 hours of use, the REPLACE FILTER indicator light will flash and there will be an
audible beep. Replace the filter with a new one. Press the REPLACE FILTER indicator light for 3
seconds until the control panel lights illuminate and the unit will no longer make a beeping sound.
NOTE:
Refer to CLEANING AND MAINTENANCE section of this manual for infomation on how to
access and install the filter.
To shut off the unit at any time, press the POWER (J) button until all indicator lights to OFF.