Warranty; Ce Declaration Of Conformity; Environmentally-Friendly Disposal - MTD products Cub Cadet 769-12285 Manual Del Usuario

Warranty

Problem Possible cause
The device will not The power pack is discharged.
switch on.
Overvoltage release
switching the device
on
Overcurrent release
Power pack temperature too high or too low.
The power pack is defective.
Automatic The spool is empty.
Adjusting the line
The toothing between the metal knob and the
does not work.
line spool is dirty.
The line has torn off and is pulled into the line
spool.
The line has become caught in the spool.
The line is welded onto the spool.
The line breaks off The line comes into contact too frequently with
too frequently. fixed objects, e.g. fences, trees, etc.
frequently.
Warranty
The warranty conditions of our local company or
importer apply in all countries. Under the terms of
the warranty we will repair faults on your device
free of charge, insofar as material or manufactur-
ing defects are the cause. To make a claim under
warranty please contact your seller or your nearest
branch.

cE Declaration of conformity

Further details about the device are con-
tained on the separately enclosed CE
Declaration of Conformity, which forms part
of this instruction manual.
769-12285
All manuals and user guides at all-guides.com
remedy
Charge the power pack.
If this occurs again take your device to a
specialist workshop.
If this occurs again take your device to a
specialist workshop.
Allow the power pack to cool down or
heat up.
Replace the power pack.
Replace the line spool.
Use a brush to remove dirt from the
parts.
Take off the line spool, if necessary re-
wind the line by gently pulling and insert
the spool.
Remove the welded line part, if neces-
sary rewind the line by gently pulling and
insert the spool.
Use the plant protection bow.

Environmentally-friendly disposal

Electrical tools, accessories and packaging must be
routed into an environmentally compatible recycling
chain.
Power packs/batteries:
Do not dispose of power packs/batteries
in domestic waste, by burning or throwing
into water. Power packs/batteries must be
collected, recycled or disposed of in an
environmentally friendly manner.
Power tools:
Do not throw your power tool away with
domestic waste! Take it to a disposal
facility.
EN
25