Disposal; Maintenance, Service And Warranty - SFS intec isoweld 3000 Manual De Usario

Disposal

The tool must not be disposed of with household refuse. Dispose of
the tool at the disposal points provided for this type of equipment in
accordance with the national or local regulations.
The tool must be disposed of in accordance with the European Directive
2002/96/EC (WEEE). This directive regulates the return and recycling of
waste equipment within the EU.

Maintenance, service and warranty

• Regularly clean the tool using a soft cloth and mild cleansing solution.
• Protect the tool from moisture and dirt.
Electrical maintenance
On principle, electrical equipment may only be serviced and repaired by qualified techni-
cians.
Service
For technical information, please contact SFS intec tool service.
Warranty
1. This induction welding tool has been carefully checked, tested and subjected to
strict quality control.
2. We warrant the rectification, free of charge, of defects on the induction welding tool
that occur within 24 months of the date of sale to the end user and that are due to a
material or manufacturing fault. Individual special regulations apply to the conditions
of the warranty in some countries. We reserve the right to rework defective parts or
replace them with new ones. The ownership of the replaced parts is transferred to
us.
3. Improper usage or handling, as well as the opening of the tool by unauthorised
repair centres, will render void any claims under the warranty. The warranty excludes
the following: damage caused by penetration of water or other liquids, a cut or dam-
aged cable, damage to the electronics and mechanical damage caused by overload-
ing. Likewise excluded are wear parts such as the induction coil, gliding foil etc.
4. Claims under the warranty can only be accepted if defects (as well as transport
damage) are notified without delay. The statute of limitations is not automatically
extended by the provision of service under the warranty.
5. If you wish to make a claim under the warranty, please send the original proof of
purchase, together with the tool, to one of our SFS sales outlets. You will find these
at www.sfsintec.biz.
6. Any further claims by the purchaser – in particular the right to rescission, price
reduction or claims for damages – are excluded due to the warranty obligations
undertaken by us, as far as permitted by the law.
7 . The purchaser is entitled, at the purchaser's choice, to a price reduction (reduction
of the purchase price) or rescission (annulment of the contract of purchase), if we
are unable to rectify within a reasonable period any defects that may occur.
45