Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
19. [+/-]
Sign Change Key
Reverse the sign on the display.
20. [∆%]
Delta Percentage
Automatically compares any two amounts and then calculates and
prints the difference and percent of change.
21. [C/CE]
Clear / Clear Entry Key
Clears a live entry by pressing this key once. Press twice to clear the
accumulator or pending calculation. Does not clear the Memory or
Grand total.
22.
Numeric Keys
[0]-[9], [00] & [•]
The calculator uses the conventional 10-key indexing keyboard, and
includes the double zero key and decimal point key. Whole numbers
are entered exactly as they are written.
23. [−]
Minus Key
Subtracts an amount from the accumulator. To subtract the same
amount more than one time (repeat subtraction), enter that amount
once and depress the Minus key as many times as necessary. If this
key is depressed immediately after [%] key, it works as percent minus
key.
24. [+]
Plus Key
Adds an amount to the accumulator. To add the same amount more
than one time (repeat addition), enter that amount once and depress
the Plus key as many times as necessary. If this key is depressed
immediately after [%] key, it works as percent plus key.
25. [N]
Item Count Key
Calculations with item count and/or averaging. Also used to set the N
count to Gross or Net.
26. [# / S]
Date / Subtotal Key
# :
It will print live entry as an identifier as an invoice number with "#"
mark.
S :
It prints but does not clear the accumulator.
27. [T]
Total Key
Prints and clears the accumulator. When this key is pressed with the
"GT" switch is on, the result is accumulated automatically in the
memory register.
28.
Memory Total Key
[MT]
Prints and clears the memory
29. [MS]
Memory Subtotal Key
Prints but does not clear the memory.
30. [M-]
Memory Minus Key
Subtracts an amount from memory. If there is a live calculation
pending, the Memory Minus key will complete the calculation and
subtract the amount from Memory.
31. [M +]
Memory Plus Key
Adds an amount to memory. If there is a live calculation pending, the
Memory plus key will complete the calculation and accumulate the
result to Memory.
32
[÷], [=]
Square Root
.
By depressing the ÷ and then the = key the square root result will be
achieved.
All manuals and user guides at all-guides.com
- 10 -
.
Publicidad
Tabla de contenido
