NUTRIBULLET Manual De Instrucciones página 18

Care & maintenance.
Please follow the below cleaning
instructions before the first use,
and after each use.
Cleaning the NutriBullet
simply place any of the pieces
(except for the motor base and
extractor blade) on the
RACK
of the dishwasher or hand
wash with warm soapy water
and rinse.
Here's how to clean
the NutriBullet
The most important
STEP 1:
thing — ALWAYS UNPLUG the
motor base from the power
supply outlet when it is left
unattended, before assem-
bling, disassembling, changing
accessories or approaching
parts that move in use or when
cleaning.
Do not attempt to
handle the appliance until all
parts have stopped moving!
Remove the cup/ex-
STEP 2:
tractor blade assembly from the
motor base.
Clean the individual
STEP 3:
components (motor base, ex-
tractor blades, NutriBullet
cups) as follows:
18
is easy,
®
TOP
:
®
®
MOTOR BASE:
• For the most part, the motor
base doesn't really get dirty,
but if you neglect to twist the
extractor blade on to the cup
tightly, liquids can leak out
and get into the base and
stick to the activator buttons.
• To avoid risk of injury,
use your hands or utensils
to clean the white actuator
Tabs while the NutriBullet
plugged in.
• Do not remove the rubber or
plastic liners inside the motor
base.
• Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the inside
and outside of the motor base
until clean.
• Pay particular attention
to the white Actuator Tabs
on the inside of the motor
base to loosen any sticky
debris from drips and spills.
If necessary, you may use a
small brush to scrub the area
to ensure it is kept clean.
WARNING:
the motor base in water.
NEVER
is
®
Never submerge