NUTRIBULLET Manual De Instrucciones página 7

electrical hazard. Assure
that power cord and
plug are undamaged.
Discontinue use and
replace NutriBullet
if you detect cracking,
crazing, cloudiness or
damage to the plastic.
Assure that the blades
rotate freely and that
the gasket is seated
and undamaged.
Assure that motor base
switch actuators are
unobstructed, clean, and
depress easily. Follow
maintenance instructions
in this user guide on
pages 14-15. Never
operate your NutriBullet
with damaged
components. If your
NutriBullet
®
in any way, immediately
discontinue use and
contact Customer
Service.
• Do not allow the cord
to hang over the edge
of the table or counter.
Do not pull, twist, or
damage the power
cord. Do not allow cord
to touch hot surfaces,
including the stove.
cup
®
®
malfunctions
• If the motor stops
working, unplug the
motor base and let it
cool for an hour before
attempting to use it
again. Your NutriBullet
has an internal thermal
breaker that shuts off the
motor when it overheats.
The thermal breaker
will reset when the unit
is unplugged and the
thermal breaker cools
down sufficiently.
• If the supply cord is
damaged, it must
be replaced by the
manufacturer, its service
agent or similarly
qualified persons in
order to avoid a hazard.
CAUTION: In order to
avoid a hazard due to
inadvertent resetting
of the thermal cut-out,
this appliance must not
be supplied through
an external switching
device, such as a timer,
or connected to a circuit
that is regularly switched
on and off by the utility.
®
7