Unpacking; Requirements On The Installation Location; Prior To First Use; Operation - Graef FW 500 Manual De Instrucciones

• Do not flush the unit in water and do not immerse it in water.
• The food processes must be free of hard components (such as bones, fro-
zen pieces).

Unpacking

Proceed as follows to unpack the unit:
• Pull the unit out of the cardboard box.
• Remove all packaging and possible stickers on the unit (do not remove the
name plate).

Requirements on the installation location

For safe and fault-free operation of the unit, the following has to observed
during installation:
• Use a firm, even, horizontal, non-slip and heat resistant surface with a suffi-
cient load capacity.
• Choose the location in such a way that children cannot reach moving parts
(in particular the blade) of the unit.
• The unit is not designed for installation in a wall or a built-in cupboard.
• Do not set up the unit in a hot, wet or moist environment.
• The power outlet must be easily accessible so that the power cable can be
quickly removed in case of emergency.

Prior to first use

Clean all individual parts thoroughly in order to remove potential production
left-overs. See "Cleaning".

Operation

NOTE
• The maximum duration of use is abt. 5 minutes. Subsequently, let the unit
cool down for about 10 minutes before using it again.
28