Costway SP37081 Manual Del Usuario página 3

Swing Assembling
1. Swings arrives in 4 pieces, 2. Put the jump body on the
and 2 hanging ropes, a jump floor, and put the 4 velcros to
body for assembly. the black mat direction
4. Put the tube like this. 5. Put 2nd tube to the sleeve,
small socket to the big socket
of the 1st tube, and connect it.
7. Then connect the body as a 8. Assemble the screw bolt,
round platform. first put it through the velcro
belt.
10. Assemble the screw bolt to 11. Tighten it with the screw
the tube of the frame. nut,do not forget the washer.
4
3. Put the 4 metal tubes with
foam into the sleeves one by
one.
6. Repeat it, and make it like
half folded as the pic.
9. Screw bolt goes through
the velcro belt cover.
12. Use the wrench to tighten
it before use.
13. After the bolt assembling, 14. Top appearance as the pic
and cover the velcro belt, and
shows.
repeat 3 times on other 3
bolts.
Tent Assembling
1.Lay the cover on swing surface. The four openings are facing to four hanging ropes.
2.Lock the buckle on the bottom of the opening. Repeat this 3 times one by one.
3.Pull the rope and pass through the ring on top of the swing. Then go through the black plastic
buckle on the rope like pictures shows. And repeat it for the other rope.
2
1
4.The length of the rope is adjustable. Adjust it to a suitable height. The assembly is finished.
15. Assembly is finished,
and ready for swing.
4
3
5