Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
B
2.
Before starting up your terminal, make sure that a pre-charged battery has been correctly
inserted into the battery compartment (on the back of your terminal).
•
To switch on the device, press the On/Off key and keep pressing it until it starts up, and
then release the key.
•
To switch off the device, press the On/Off key and keep pressing it until it is turned off.
Note 1: When you switch on the device, the keypad is automatically locked.
To unlock the keypad, press the "OK" key until the locking key disappears.
Note 2: All the parameters, including the volume setting, are retained and remain the same
when you turn off the device or when the battery is removed from it.
2.1. Using the Vokkero system – Basic implementation
Principle:
To set up a conference, all you have to do is:
•
Assign a different number to each device taking part in the conference.
2.2. Assign a number to a system
To set up a conference, fi rstly you should identify all the devices that will take part in it and
assign them a number (role). A conference can be set up involving 2 to 3 devices, which will
be identifi ed by a number ranging from 1 to 2 or 1 to 3.
Note 1: One of the devices absolutely must bear the number 1.
Note 2: Do not assign the same number to several devices because that would prevent the
conference from running smoothly.
Procedure :
•
Unlock the keypad
•
On the home screen, press the "Menu" key until you reach the User MENU (the confi -
guration menu will be displayed).
•
Using the "+" or "-" keys, access the Role sub-menu (role setting). Press "OK" to vali-
date your choice.
•
Select the identifi cation number for the device by using the "+" or "-" keys.
•
Press "OK" to validate your choice.
•
Press "Menu" to return to the home screen.
2.3. Adjusting the listening volume
•
Make sure that the keypad is unlocked.
•
Make sure that you are on the home screen. Press "+" or "–" for 2 seconds.
•
You will then hear a beep in the earphone.
•
To adjust the volume, press "+" or "–". There are 9 volume levels. The maximum or mini-
mum level is visible via the volume icon (cf. the description of the screen icons)
•
Press "OK" to validate.
208446A-V1-UG-VOKKERO BASIX
Start-up of the terminal – Important information
GB
7
Publicidad
Tabla de contenido
