Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replace the batteries.
Slide in the battery compartment cover.
Pull the rubber housing back in place.

First use

Connecting/disconnecting air hose
Screw the compressor's air inlet hose into the air inlet (H).
Tighten the connections of the air inlet (H) and of the air outlet (K).
Switching on/off
To switch on the product, press and hold the ON/OFF button (E).
The display (D) switches on.
To switch off the product, press and hold the ON/OFF button (E) again.
Switching the display backlight on/off
To switch on the display backlight, press the LIGHT/UNIT button (F).
The display backlight automatically extinguishes after 5 seconds.
Setting the pressure unit (psi | bar | kPa | kg/cm²)
Press and hold the LIGHT/UNIT button (F) for 3 seconds. The unit
indicator (C) changes. The display backlight goes on.
Press the LIGHT/UNIT button (F) again to change to the next unit.
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido