Publicidad
Idiomas disponibles
Idiomas disponibles
PS3 Connection
NOTE: Please ensure that your console is turned OFF before connecting or disconnecting the TOPDRIVE.
1. Connect the accelerator/brake pedal unit into the socket at the rear of the TOPDRIVE Wheel.
2. Connect the USB plug into port 1 of your console .
3. Place the accelerator/brake pedal unit in convenient location under a table or in front of a chair within easy
reach.
4. Turn "ON" your PS3.
5. The four LED's will begin to flash.
6. Press the MODE button to connect the Steering Wheel.
7. Press and hold the MODE button for 2 seconds to enter the PS3 home window
8. The LED number indication on the steering wheel will represent the player number the steering wheel is
assigned to :
LED 1 ~ 4 = Player 1 ~ 4
LED 1 + 4 = Player 5
LED 2 + 4 = Player 6
LED 3 + 4 = Player 7
Please note: Once the steering wheel is disconnected from the USB port of the PS3 or the PS3 console is
restarted or switched off you will need to re-connect the steering wheel.
PC
System requirements
1. Uses USB Port
2. Compatible with Windows98/ME.2000/XP & Vista
3. DirectX version 7.0 or later
To connect the Topdrive, plug the Topdrive's USB connector into a spare USB port on your computer, (Note:
To use a USB controller, you must be running windows 98/98SE/ME/2000/ XP/ Vista operating systems)
Installation
1. Enter into Windows
2. Insert the supplied Driver CD into your PC CD Rom
3. Double click the SETUP icon
4. Install the driver 'LS-USBmX1/2/3' following system prompts
5. Connect the Steering Wheel to a USB Port on the PC
6. Select 'Game Controllers' in the Control Panel to calibrate the steering wheel properties
Publicidad
