Descargar Imprimir esta página

Logic3 PSU448 Manual De Instrucciones página 6

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
4. Press the Select button to enter the sensitivity adjustment.
5. Press the Select button again to select between the following:
Middle (Green-LED illuminates)  Highest (Green-LED flashing quickly)  Lowest (Green-LED flashing
slowly)
6. Press the UP button on the D-pad to exit.
Button Relocation
The TOPDRIVE Steering Wheel incorporates a very useful feature called Button Relocation to re-map any
control button to the most convenient and useful button configuration for the user.
1. Press and hold the program button (or start and select) for 3 seconds till the green led illuminates
2. Press the button that you wish to relocate the function to, the LED starts to flash.
3. Press the button with the function you wish to be relocated, the LED turns OFF, the relocation is
complete.
4. Repeat the above steps to relocate further control buttons.
5. (NB. Please ensure that Button Relocations are deleted before changing to a different driving game,
otherwise the controls may not match the new game being played)
To Clear a Button Relocation (Remap)
1. Press and hold the program button (or start and select) for 3 seconds till the green led illuminates
2. Press the desired button to delete the Button Relocation, the LED starts to flash.
3. Re-press the button, the LED is OFF, deletion is complete.
4. Repeat the above steps to clear any other Button Relocations
Power Save (Sleep Mode) – PSU449 only
The steering wheel features a power save mode on save battery power. There are 2 ways to enter the power
save mode when the steering wheel is switched to the ON position.
1.
No connection is made between the steering wheel and receiver after 4 minutes
2. Once connected the steering wheel is left idle for 3 minutes
To exit the power save move press "START", the LED indicator on the receiver will now glow.
Low – Battery alert function – PSU449 only
When the battery life of the steering wheel is low, the LEDs on the steering wheel will begin to flash indicating
the current batteries need to be replaced.
WARNING: Please ensure that the batteries are inserted correctly. If they are inserted incorrectly , it may
cause personal injury as well as damage to your Steering wheel.

Publicidad

loading

Productos relacionados para Logic3 PSU448

Este manual también es adecuado para:

Psu449Topdrive gt 3in1Topdrive freebird rf 3in1