Configuration; Navigation Status Mode; All - Airzone AZXWSERVERAPP Manual De Usuario

 Status
parameters at the user level.
 Configuration
parameters. Available only for administrator profile.
*Note: Not available in All option.
 Main screen

3.2. Navigation status mode

From this navigation mode, the control parameters at the user level of the different
systems/zones associated with the Webserver can be displayed and modified. Depending on
the selected option in the navigation menu, the control zone will adapt the information
represented.

3.2.1. All

This is the main screen. In the control zone, the different systems associated with the
Webserver are represented (Fig. 1). From this screen, it is possible to set up the following
parameters:
o Eco-Adapt function
your zoning system and defining the same temperature limit for all zones. This option allows
energy savings depending on the selected standards of efficiency:
The default status is OFF. Press on
options are:
 Manual Mode
 Saving Mode: The temperatures limits are defined according to the saving mode
established.
: Default mode. It allows controlling the different zone and system
: This option allows setting up the installation system and zone
: This option allows returning to the main screen.
: The Eco-Adapt function allows improving the power efficiency of
: The temperature limit is defined as master of the system.
Manual
Saving
, then the available options are displayed. These
Lim. Min. Lim. Max.
18ºC 26ºC
19ºC 30ºC
≥24ºC ≤22ºC
≥25ºC ≤21.5ºC
≥26ºC ≤21ºC
, , , , .
31