Airzone AZXWSERVERAPP Manual De Usuario página 46

You can connect your Webserver to a router in two different ways:
- Searching for available wireless networks. Press
networks, the type of security and the power signal are displayed (Fig. 22).
Select the desired Wi-Fi network and enter the password.
Not : The router password must not contain these symbols <, " and &.
e
The Webserver will assign a Fixed IP address to this network, the new network
configured will automatically be considered a Fixed IP address. This process can take
a few minutes.
To see the Fixed IP address assigned:
 From the master thermostat of your system: Configuration
User > IP.
 From your mobile App: Settings > Configure Webserver > Add server > Auto, the
available servers and your IP address will be displayed.
- Manually. Press
name, choose the type of security and enter the
password.
The router password must not contain these symbols <,
Note:
" and &.
Press
in case you do not wish to make the link
(Fig. 23).
Note: The external control configuration of the device should be made by a network technician or your
Internet service operator.
 Back: This option returns to the Webserver main screen.
46
. Enter the network
to allow the connection or
, and the available
> Settings
Fig. 23
>