Roav R3130 Manual Del Usuario página 6

Jump Starting Your Car
1. Turn on your ROAV Jump Starter 1000A and make sure it is over
50% charged.
If the jump starter is less than 50% charged, it may
not be able to start your engine. We recommend fully
charging the battery before you use the jump starter for
the first time.
05 English
All manuals and user guides at all-guides.com
2. Plug in the jumper cables. The LED display on the jump cables
should show circulating clockwise.
3. Connect the red clamp to the positive terminal (+) and the black
clamp to the negative terminal (-) of your car battery.
4. Start your engine. The cables' LED display should show the current
voltage of the jump starter battery.
English 06