Technical Specifications; First Time Installation - Faber PRO TOTAL INOX Manual Del Usuario

Tabla de contenido

Publicidad

PRO TOTAL INOX
/PRO DELUXE

TECHNICAL SPECIFICATIONS

- Frame in AISI 410 stainless steel/Matte varnish
- Cup tray
- Chrome support plate
- Chrome lever
- ABS tray
- Black ABS or metal grille
- 15-bar pump
- Aluminium exchanger
- Brass cartridge and adjustable pod press
- Resistance: 500 w
- Fixed thermoregulator 95°/145° MR
- PET tank capacity 1.3 lt.
- Power supply 220 v – 50 Hz
- Power supply 110 v – US kit
DIMENSIONS
Width 21 cm | Depth 32 cm
Height 35 cm | Weight approx. 5 kg
FIRST-TIME INSTALLATION
Remove the packaging and make sure that the ap-
pliance is intact. If not, contact your retailer without
using it.
All the packaging elements represent SOURCES OF
DANGER for children and the handicapped. The elec-
trical system must be grounded. OFI S.r.l. cannot be
held responsible for damage caused by not grounding
the electrical system. Check that the technical data
for the appliance is compatible with that of the elec-
trical distribution network and your system. Do not
use unapproved extension cables or adapters.
20
7
3
2
1
6
(1) ON/OFF switch (2) Temperature indicator
light (3) Coffee dispensing switch (4) Pod
compartment closing lever (5) Pod compartment
filter (6) Drip tray (7) 1.3 L tank compartment lid
(8) Delivery spout
4
5
8

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pro deluxeSlot plastSlot inox

Tabla de contenido