Water Heating - Faber PRO TOTAL INOX Manual Del Usuario

ACCENSIONE APPARECCHIO
Switching on appliance: Press the T1 or T3 button or T1 and T3 simultaneously to turn on the device.
Press T1 and T3 simultaneously for 2 seconds to turn off the device.

WATER HEATING

The first time it is switched on, it is necessary to wait for the water to be heated before being able to proceed
with coffee brewing.
All the dispensing functions are disabled and the heating phase is signaled to the user with slow flashing of
the ICO1 and ICO 3 LEDs (1 second)
As soon as the correct water temperature is reached, all functions are enabled and the machine is ready for
delivery.
The machine ready phase is signaled to the user with fixed lighting of the ICO1 and ICO 3 LEDs
INITIAL HEATING
When the machine is turned on, when the working temperature is reached, the pump is automatically turned
on for 0.8 seconds to preheat the water present between the exchanger and the infuser. The function is not
carried out if the exchanger heats up in less than 5 seconds (it was already hot)
Activate by default
COFFEE FUNCTION (2 timed doses programmable by the user)
Short or long coffee button (T1 - T3): momentary pressure to start-stop dispensing.
Stop automatic brewing when the preset time is reached or by pressing the coffee button during brewing.
The brewing in progress is signaled by the flashing of only the LED (ICO1 or ICO3) corresponding to brewing
in progress.
L'utente può riprogrammare a piacere la durata od il volume di erogazione del caffè corto o lungo con la
seguente modalità operativa (esempio riprogrammazione caffè corto):
1. Iniziare l'erogazione premendo e mantenendo premuto il tasto T1.
2. Terminare l'erogazione rilasciando il tasto quando raggiunta la q.tà desiderata.
3. La nuova durata di erogazione viene automaticamente salvata e verrà riproposta ad ogni successiva
erogazione.
25