Care And Maintenance - LF allen + roth 9012SSMV Instrucciones De Montaje

9.
Mark mounting points on wall through holes in the back
tubes of the unit. Hammer wall anchors (not included) into
wall, unless mounting screws (not included) will go directly
into a stud.
(NOTE: Do not use a wall anchor if mounting screw will be
going into a stud.)
Place unit against wall, lining up holes in wall and holes in
back tubes. Complete mounting by tightening mounting
screws (not included) into studs or wall anchors (not includ-
ed).
10.
Install glass shelves (D).

CARE AND MAINTENANCE

Cleaning with a dry cloth may be sufficient, but for other stains or marks wipe gently with a damp cloth.
DO NOT use strong detergents or abrasive cleaners; they may damage the surface of this product.
D
7
Fig. 9
Fig. 10
IS9112-I4