512 Audio SCRIPT Manual Del Usuario página 6

GETTING STARTED WITH SCRIPT
First, remove Script from its packaging and attach the included arm mount to the bottom
of the microphone. Rotate and tighten as needed so that the 512 logo and headphone
volume knob are facing you and the microphone is firmly attached to the arm mount.
You are now ready to attach Script to a microphone boom arm, mic stand, or desktop
mount. Once mounted to your mic stand of choice, connect Script to your computer
with the included USB-C to USB-A cable. The headphone volume knob/mute button
should illuminate, which indicates that the microphone is now powered.
When you are ready to record or begin streaming, confirm that the 512 Audio logo
and volume knob are facing you. Next, position the microphone a few inches away
from your mouth.
That's it! You're all set to capture your voice with broadcast-quality audio. Enjoy!
6 | EN