Force Adjustment And Automatic Closing - Yale powr 600 Manual De Instrucciones

6.Force adjustment – automatic closing
Force adjustment
Due to wear and tear of the door it might happen that the force limitation has to be
re-adjusted
A re-adjusting ofthe force limitation from the factory setting (value 2) can
lead to serious damage and injuries of persons and/or goods!
Only authorised experts are allowed to do this adjustments !
Press SET-button as long as 3appears on the display. WithUP andDOWN buttons you can re-
adjust the force tolerance (values 1-3, 3=max.)
By pressing SETyou confirm the re-adjustment.
It is mandantory to check afterwards that the force limitation is still in compliance
with the legal regulations in your country.
Only authorised experts are allowed to do changes !
Automatic closing
Press DOWN-btton until display shows „-".
With UPandDOWN-button you choose the automatic closing time in minutes. Maximum 9
minutes
By pressingSET you confirm your settings.
With value „0" the automatic closing function is de-activated
It is mandantory to have photocells installed whilst using automatic closing function!
10