7.
Connection of accessories
Photocells
The photocell function hast o be activated in the menu firstly.
PressDOWN-button until display shows„II".
PressUP-button, the display now shows„H". Press SET-button to confirm settings.
Photocell function is now activated
Important:
If no photocell is connected, then the photocell function hasto be de-activated !
Factory setting:photocell de-activated
Connect photocell to the control unit ofthe operator as shown in below picture
Push-button,Warning light, Passdoor switch
Connection see pictures below:
Push button
Warning light
24-35V DC
max. 500 mA
11
Pass doorswitch
NC-Contakt