You can store up to 20 stations, 10 stations in DAB+ mode and 10 stations in FM mode.
1. Set the desired station.
2. Press the [Preset] button for about 3 seconds.
3. Use [
] or [
] buttons to select the number where you want to store the station and press [ENTER] button to confirm.
4. Confirmation appears on the display.
5. Once a station has been stored, you can recall the station by pressing the [Preset] button.
6. Use the [
] or [
] buttons to scroll through the preset stations and press the [ENTER] button to select the desired
station.
Connect a mobile device to the radio using AUX.
Switch to AUX mode by pressing the [Mode] button and selecting "AUX" or
1. Connect a mobile device to your radio using an AUX cable (not supplied).
2. Play the desired audio file from your mobile device.
3. Adjust the volume using the volume control or [VOLUME] buttons on the remote control.
The AUX terminal allows you to connect various devices such as an MP3 player, cassette player, minidisc player, DVD player,
etc. to the AUX terminal.
1. Push the [info/menu] button for a few seconds
2. Go to <Factory Reset> with the [
3. select <Yes> with the [
4. After the radio is reset, the radio will start searching for DAB+ radio stations and will set the time again if there is a strong
DAB+ signal.
Note: Please note that all programs will be deleted after the reset.
Radio
•
Clean the radio with a slightly moistened cloth. The cloth must not be wet! Do not use aggressive cleaning agents!
•
Do not place the radio in a hot, humid or dusty place.
•
Keep your radio away from devices that generate heat or emit electrical signals.
] or [
] buttons
] or [
] buttons en push the [Enter] button
7