English; How It Works - RayTek MiniTemp MT2 Manual Del Usuario

All manuals and user guides at all-guides.com

English

Warning
(units with laser sighting)
C II (FDA)
LASS
Do not point laser directly at eye or indirectly off
C 2 (IEC)
AND LASS
L W L
ASER ARNING ABEL
reflective surfaces.
AVOID EXPOSURE - LASER RADIATION
IS EMITTED FROM THIS APERTURE
C A U T I O N
Cautions
LASER RADIATION – DO NOT STARE INTO BEAM
OUTPUT < 1mW WAVELENGTH 630 – 670 nm
CLASS II LASER PRODUCT
All models should be protected from the following,
COMPLIES WITH CFR 1040.10
EMF (electro-magnetic fields) from arc welders,
induction heaters
Static electricity
Thermal shock (caused by large or abrupt ambi-
ent temperature changes—allow 30 minutes for
unit to stabilize before use)
Do not leave the unit on or near objects of high
temperature
Introduction
We are confident you will find many uses for your
handheld noncontact thermometer. Compact, rugged,
and easy to use—just aim, pull the trigger, and read
current surface temperatures in less than a second.
You can safely measure surface temperatures of hot,
hazardous, or hard-to-reach objects without contact.

How it Works

Infrared thermometers measure the surface tempera-
ture of an object. The unit' s optics sense emitted (E),
reflected (R), and transmitted (T) energy, which is
R
T collected and focused onto a detector. The unit' s
E
electronics translate the information into a temperature
Target reading which is displayed on the unit. In units with a
laser, the laser is used for aiming purposes only.
2