Fantini Cosmi Intellitherm C75 Manual Del Usuario página 7

CUSTOMIZING THE Intellitherm C75 (PROGRAMMING)
Intellitherm C75 programming is extremely friendly, the user shall just change the colours of the
sectors on the ring coinciding with the time periods required, i.e.:
- red for time periods during which comfort temperature is required
- half red and half black for time periods during which saving temperature is required
- black for time periods during which the system shall be off
To change the colours of the sectors just proceed as described in the following numbered steps.
move switch P up to PROG
2
(programming) position.
The display will show
time 00.00 and day 1.
The blinking cursor on the ring
will move automatically to the
first sector after the 24 hours.
move the blinking cursor (forth
3
or back) around the ring using
keys:
The sector to be
changed will blink
on the ring and the
display will show the
corresponding time.
4
press keys:
to colour the ring
sectors.
Each time one of the three
keys is pressed the sector
will colour and the cursor
will move forward by half
an hour:
- red key for red sector
- blue key for half red
and half black sector
- black key for black sector
To move the cursor without
changing colour
to sectors use keys
"JOLLY" FUNCTION
This function of Intellitherm C75 enables to cut out temporarily
the automatic program at any time (without changing its setting),
in order to have constantly the required temperature (comfort,
saving, off) for a period of time ranging from 1 to 240 hours.
1 switch S to AUTO position
switch P to AUTO position
2
3
press the red or blue or black key to set how many hours
(shown on the display) the automatic program is to be cut
out in order to "force" temporarily the required temperature
(comfort or saving or off). The ring on the display will take
on the colour of the temperature selected.
1
move switch S to AUTO position
P
H
C
once the times for a day have been programmed, press
5
key D (day) to change the day and to repeat the previous
steps for all the other days of the week.
If the program for one day is suitable also for next days,
press key C (copy) to copy it.
The day will move on by one unit and the previously
memorised program is copied to the next day.
6 after completing the required programming, move switch P
to AUTO position.
S
P
7
D
Once the time set has elapsed Intellitherm
will resume the automatic program.
To shorten or to cut out the "JOLLY" period
before the set time, press a key of different
colour than the one corresponding to display ring
UK
S
P