Pressure Washer Rinsing; Automatic Cool Down System(Thermal Relief) - Craftsman 580.752921 Instrucciones De Uso

Ocultar thumbs Ver también para 580.752921:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Pressure Washer Rinsing
For Rinsing:
1.
Remove black detergent spray tip from nozzle extension.
2.
Select and install desired high pressure spray tip
following instructions How to Use Spray Tips.
_, WARNING Kickback from spray gun could cause you
,_
to fall resulting in death or serious injury.
• Operate pressure washerfrom a stablesurface.
• Beextremely carefulif youmust usethe pressure washer from
a ladder,scaffolding, o r any othersimilar location.
• Firmlygraspspraygunwith bothhandswhenusinghigh
pressure sprayto avoidinjurywhenspraygun kicksback.
3.
Keep the spray gun a safe distance from the area you
plan to spray.
4.
Apply a high pressure spray to a small area, then check
the surface for damage. If no damage is found, it is okay
to continue cleaning.
5.
Start at the top of the area to be rinsed, working down
with same overlapping strokes as you used for washing
and applying detergent.
Automatic Cool Down System(Thermal Relief)
If you run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reach temperatures above
125°F. The system engages to cool the pump by discharging
the warm water onto the ground.
16

Publicidad

Tabla de contenido
loading

Tabla de contenido