Important Safeguards - Tristar BR-1013 Manual De Usuario

IMPORTANT SAFEGUARDS


Read all instructions before use.

Do not touch hot surfaces. Use handles or knobs.

To protect against electric shock, do not immerse cord, plug or appliance in water or
any other liquid.

Unplug from outlet when not in use and before cleaning. Allow the device to cool
before putting on or taking off parts. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions, or has been damaged in any
manner.

The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries and invalidate any warranty you may have.

Do not use outdoors, or on or near direct heat sources

Do not let cord hang over edge of table or counter, or touch hot surfaces or come
into contact with the hot parts or allow the product to be situated underneath or close
to curtains, window coverings etc.

This appliance is for household use only and only for the purpose it is made for.

The appliance must be placed on a stable, level surface.

This appliance is an attended appliance, and as such should never be left ON or
whilst hot without adult supervision.

This appliance is not intended for use by persons (including children) with reduced
physical,sensory or mental capabilities,or lack of experience and knowledge,unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

This device is not intended for use with an external timer or a remote control system.

Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.

This device is not intended for use with an external timer or a remote control system.

Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.

A damaged cord or plug must be replaced by an authorized technician to avoid a
hazard. Do not repair the device yourself.

Using an extension cord or something similar is not allowed.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
9