Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
KNOWYOURPRESSURE WASHER
_Read
the Operator'sManual and safety rules before operatingyour pressurewasher.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Savethis manual for future reference.
A - Spray Gun-- Controls the application of water onto
cleaning surface with trigger device, includes trigger lock.
B - Cleaning Tank - Used to provide pressure washer safe
detergents into the low pressure stream.
C - Spray Tips -- Detergent, 0°, 15° and 40°: for various
high pressure cleaning applications.
D - Recoil Starter -- Used for starting the engine manually.
E - Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
F - Throttle Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
G - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
H - Pump -- Develops high pressure.
J - AutomaticCool DownSystem -- Cycleswater through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
K - High Pressure Outlet -- Connection for high pressure
hose.
L - Water Inlet -- Connection for garden hose.
IVl- Oil Fill/Dipstick -- Check, add and drain engine oil here.
N - High Pressure Hose -- Connect one end to water pump
and the other end to spray gun.
Items Not Shown:
Data Tag (near rear of base plate) -- Provides model and
serial number of pressure washer. Pleasehave these readily
available if calling for assistance.
Nozzle Extensionwith Quick Connect -- Allows you to
switch between four different spray tips.
Safety Goggles -- Always usethe enclosed safety goggles
when running your pressure washer.
Warning/Operating instructionsTag -- identifies hazards
and proper procedure to start/stop pressure washer.
Publicidad
Tabla de contenido
