KNOWYOURPRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressurewasher.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Savethis manual for future reference.
@
@
A ° Spray Gun-- Controls the application of water onto
cleaning surface with trigger device. Inc!udes trigger lock.
B ° Accessory Tray -- Provides convenient storage for
accessories, such as gun, spray tips, etc.
C ° Spray Tips -- Detergent, 0° and 25°: for various high
pressure cleaning applications.
D ° High Pressure Hose -- Connect one end of hoseto
water pump and the other end to spray gun.
E - Re€ell Starter -- Used for starting the engine manually.
F - Air Filter -- Protects engine by filtering dust and debris
out of intake air.
G ° Threttle Lever -- Sets engine in starting mode for recoil
starter and stops a running engine.
Id - Primer Buih -- Preparesa cold engine for starting.
a ° Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
K - Water Iniet -- Connection for garden hose.
L ° Pump -- Develops high pressure.
IVl° High Pressure 0utlet -- Connectionfor high pressure
hose.
N ° Engine Identificatien -- Provides me@l, type and code
of engine. Pleasehavethese readily available if calling for
assistance.
P ° Battle Bracket -- Cleaningsolution bottle fits in wire
form bracket here. Concentrate bottle not included.
R - 0ii Fill/Dipstick -- Check, add and drain engine oil here.
S ° Preject Pre@ PerfectMiW MSiphen -- Mixes concentrate
with pressure washer spray.
T ° Warning/0perating Instructiens Tag -- identifies hazards
and proper procedureto start/stop pressure washer.
U - Nezzie Extensien with Quick Ceneect -- Allows you to
switch between three different spray tips.
items Net Shawn:
_dentificatian Label (near rear of base plate} -- Provides
model and serial number of pressure washer. Pleasehave
these readily available if calling for assistance.
Automatic Ceel Dawn System -- Cycles water through pump
when water reaches125°o155%.Warm water will discharge
from pump onto ground. This system prevents internal pump
damage.