Bluetooth Settings - Sony XAV-62BT Manual De Instrucciones

Bluetooth settings

The Bluetooth settings can be configured in "BT
Menu."
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch "BT Phone" in the top menu.
To select Bluetooth Audio, touch "Source
List," then "BT Audio."
2
Touch "BT Menu."
In the case of Bluetooth Audio, touch "Play
Menu," then "BT Menu."
The Bluetooth setting menu appears.
3
Touch the desired item in the list and
configure the setting.
The items in the Bluetooth setting menu are as
follows:
"Signal"* 1
Activates the Bluetooth signal: "ON," "OFF."
"Discoverable"*
Allows the other Bluetooth device to search for
this unit: "Show," "Hide."
"Device Name"*
Changes the name of this unit displayed on the
connected device. (Default setting: "Sony
Automotive")
For details on basic operation of the keyboard,
see "About the keyboard to edit the name" on
page 40.
"Search"* 1 (page 33)
Searches for connectable Bluetooth devices.
"Device List"* 1 (page 35)
Displays the list of registered devices; connects
to a registered device; deletes all registrations.
"Auto Answer"*
Answers an incoming call automatically.
– "Short": to answer automatically after 3
seconds.
– "Long": to answer automatically after 10
seconds.
– "OFF": to not answer automatically.
"Ringtone"*
1 * 2
Uses the ringtone of this unit or the connected
cellular phone: "Default," "Cellular."
"EC/NC Mode" (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise during a call.
For normal use, set to "Mode 1."
If the outgoing sound quality is unsatisfactory,
set to "Mode 2" or "OFF."
42
(page 34)
1
1
1
"MIC Gain" (page 37)
Adjust the microphone volume for the other
party: –2 ~ +2.
"Initialize"* 1
Initializes all Bluetooth-related settings. Touch
"Yes" to confirm.
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit's
ringtone may be output even if set to "Cellular."
Note
For details on the setting of other Bluetooth devices,
refer to their respective manuals.