Using Optional Equipment
Auxiliary audio/video
equipment
You can connect up to 2 optional devices, such as
a portable media player, game console, etc., to
the front AUX terminal and rear AUX terminals
on the unit. (The front AUX terminal is for audio
only.)
Selecting an auxiliary device
1
Touch "Source List," then "AUX."
The AUX playback display appears.
Source List
ATT
Front AUX
Rear AUX
2
Touch "Front AUX" or "Rear AUX" to
select the device.
Operate via the portable device itself.
Adjusting the volume level
Be sure to adjust the volume for each connected
device before playback.
The volume level is common to "Front AUX"
and "Rear AUX."
1
Reduce the volume on the unit.
2
Touch "Source List," then "AUX."
The AUX playback display appears.
3
Start playback of the portable device
at a moderate volume.
4
Set your usual listening volume on the
unit.
5
Touch –/+ in the "Level" box
repeatedly to adjust the level.
The level is adjustable in single steps,
between –8 and +18.
Setting the type of device
By setting the type (video or audio) of each
connected device, the background screen can be
switched accordingly.
1
While no source is selected, touch
"Source List," then
The general setting menu appears. If not,
touch "General."
2
Touch v/V to scroll, then touch "Front
AUX Input" or "Rear AUX Input."
3
Touch "Audio" or "Video."
"Audio" is available for "Front AUX Input"
or "Rear AUX Input," while "Video" is
available only for "Rear AUX Input."
The setting is complete.
To deactivate the AUX input, select "OFF."
To return to the previous display, touch "Back."
Top
Rear view camera
By connecting the optional rear view camera to
the CAMERA IN terminal, you can display the
picture from the rear view camera.
Level 0
The picture from the rear view camera appears
when the back lamp lights up (or the shift lever is
set to the R (reverse) position).
Notes
• When backing up your car, watch the surroundings
carefully for safety. Do not depend on the rear view
camera exclusively.
• The picture from a rear view camera does not
appear in the rear monitor.
Tip
Even if a rear view camera is connected, you can set
the unit to not display the picture from a rear view
camera by deactivating the camera input (page 50).
.
57