Oster TSSTTVPZDA Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

t
u
P
o
se the
izza
The dedicated Pizza Drawer pizza drawer is ideal for 12-
inch pizzas, bruschetta, appetizers, quesadillas and more.
When using the Pizza Function, you will be using the
dedicated Pizza Drawer located in the lower part of
the Convection Oven. Preheat according to pizza box
instructions.
While the Pizza Drawer is in use, the upper oven will not
turn on due to wattage constraints; however the residual
heat can conveniently serve as a plate or food warmer.
Step 1. Fold out both pizza tray handles.
Step 2. Pull the pizza tray out of the unit.
Step 3. Place pizza tray on a clean flat surface and place
the pizza on it. Make sure pizza is centered and
not past any edges of the pizza tray.
Step 4. While holding the handles together, insert the
pizza tray back into the pizza drawer.
Step 5. Turn the Function dial to Pizza. The oven will
automaticlly be preset at the default temperature
for optimal cooking performance.
Step 6. Turn the Timer to desired cook time.
NOTE: If cook time is less than 20 minutes, you
must turn Timer past the 20 minute mark to
engage the timer then back to desired time.
NOTE: Cooking times for the pizza may vary and it might vary from
box instrutions. Cooking times might be less than that in the pizza
box instructions. Monitor closely first time you use it to adjust time
accordingly.
Step 7. Leave handles in the folded out position. Only the pizza tray handles
are cool to the touch.
Step 8. When completed, use handles to pull the pizza tray out of the pizza drawer.
CAUTION: Cooked food and metal rack can be
very hot, handle with care. Do not leave unit
unattended.
Step 9. Place pizza tray on top of a heat resistant surface and carefully remove
pizza.
D
f
rawer
unCtion
English-8
(s
f
. 9)
ee
ig
Figure 9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

187222

Tabla de contenido