Avanti MT112K3S Manual De Instrucciones página 12

A. One-stage Cooking
Microwave cooking allows you to customize
1.
cooking power and time. First, select a power
level by pressing the POWER button (see the
table below).
Use the number pads to set a cooking time.
2.
You can set a cooking time from one second to
99 minutes and 99 seconds.
Press POWER button to select
cooking power
Press
Once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
Touch START/PAUSE to start cooking.
3.
SPEED DEFROST
Touch SPEED DEFROST.
1.
Enter desired defrosting time by touching
2.
correct number pads. Digital timer sets minutes
and seconds from left to right so a single digit
can be set (5 for 5 seconds ) or up to 4 digits
(2405 for 24 minutes 5 seconds).
Touch START/PAUSE.
3.
NOTE:
After time has elapsed four signals sound and END
appears in display. Touch ANY pad or open door to
clear END before starting another cooking function.
During defrosting program, the system will pause
and sound beeps to remind user to turn food over,
and then press START/PAUSE to resume the
defrosting.
Note:
Weight must be in pounds and ounces.
Ounce weights less than 10 must be preceded by a 0. If label gives weight in pounds only, change the
fraction of a pound to ounces using the following chart (See page 14).
SETTING A COOKING PROGRAM
Power
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
0%
12
B. Multi-stage Cooking
For added convenience your oven offers the ability
to operate in a "Multi-Stage" cooking cycle. Each
cycle or stage can be set with a separate cooking
time and or power level.
a) To set the oven in Multi-Stage cooking
model, simply set the time and power level
of the first stage (as described in Section
One-Stage Cooking to the left).
b) To set the second cooking stage, press the
COOK key ("MEM" will appear in the
display window).
c) Select the desired cooking time and power
level for the second stage.
d) Press "Start" to begin the cooking process.
NOTE:
After cooking stage 1 has elapsed, you will hear
one "beep" sound, signaling the beginning of
stage 2. After the total time (selected cooking
times for both stages) has elapsed, 4 "beeps"
will sound and "END" will appear in the display
window. Touch ANY button or open the oven
door to clear or end the cooking program before
starting another cooking function.
DEFROST BY WEIGHT
Touch DEFROST BY WEIGHT pad.
1.
Enter weight.
2.
Touch START/PAUSE pad.
3.
** During the defrost program, the system will pause and sound
beeps to remind the user to turn the food over and then press
START/PAUSE to resume the program.