Samsung ME21K7010DG/AA Manual Del Usuario página 34

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
Problem
Cause
Heating is weak or
The oven may not work
slow.
if too much food is being
cooked or improper
cookware is being used.
The warm function
The oven may not work
does not work.
if too much food is being
warmed or improper
cookware is being used.
34 English
Action
To test the oven, put one cup
of water in a microwave-
safe container, put the
container in the oven, and
then run the microwave
for 1-2 minutes to check
whether the water is heated.
If the water is heated, reduce
the amount of food and start
the function again. Use a
cooking container with a flat
bottom.
To test the oven, put one cup
of water in a microwave-
safe container, put the
container in the oven, and
then run the microwave
for 1-2 minutes to check
whether the water is heated.
If the water is heated, reduce
the amount of food and start
the function again. Use a
cooking container with a flat
bottom.
Problem
Cause
The thaw function
The oven may not work
does not work.
if too much food is being
thawed or improper
cookware is being used.
The interior light is
The door has been left
dim or does not turn
open for a long time.
on.
The interior light is
covered by foreign
matter.
A beeping sound
If the Auto Cook function
occurs during cooking.
is being used, this
beeping sound means
it's time to turn over the
food.
The oven is not level.
The oven is installed on
an uneven surface.
Action
To test the oven, put one cup
of water in a microwave-
safe container, put the
container in the oven, and
then run the microwave
for 1-2 minutes to check
whether the water is heated.
If the water is heated, reduce
the amount of food and start
the function again. Use a
cooking container with a flat
bottom.
The interior light may
automatically turn off when
the Eco function operates.
Close and reopen the door
or press the STOP/CLEAR
button.
Clean the inside of the oven
and check again.
After turning over the food,
press the START button
again to restart operation.
Make sure the oven is
installed on flat, stable
surface.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido