Introduction - Jensen POWER 400.2 Manual De Instalación Y Operación

POWER Amplifiers

Introduction

The Jensen Power series of amplifiers were designed to meet or exceed the
CEA-2010 test standards. These new standards give all participating
manufacturers (and many don't participate) a baseline when comparing
amplifiers of similar power output. The CEA Power rating protects you, the
customer. "Power is power – it doesn't matter who makes it," is not always true.
What does matter is whether the power can be produced in the first place. The
RMS rating is the true power you are getting. At Jensen, to be fair to you and to
the competition, we rate our amps in the two most popular ratings, including
the CEA RMS rating. So feel confident that your Jensen purchase decision
was a sound one, and remember "If it's Too Loud, You're Too Old."
Before You Begin
We need to get the legal stuff out of the way, so please keep reading.
Afterwards, you'll be armed with the knowledge to install your new hard-hitting,
speaker-pumping Jensen amplifier.
Exposure to loud sounds or music can permanently damage your hearing.
Unfortunately, in many cases, the damage is not noticeable until years later. In
addition, loud music may hinder your ability to hear traffic, police, and fire or
emergency vehicles. Please be responsible and have respect for other people
by listening at moderate volumes!
Warranty Service
If your Jensen amplifier should ever require service, you will need the original
dated receipt. If you must return the unit for any reason, always include the
receipt with the product.
1