Bushnell 11-1026 Manual De Instrucciones página 10

Using the Operational Modes
Mode Icon
Line Frequency 60 or 50
Continuous CT
Memory Access MEM
Delete Last LSt+Trash
Can
Settings Description
60 Hz, 50 Hz Set to match the AC power frequency (cycles) of
your country. This ensures that stills and videos shot
under fluorescent lighting appear normal.
OFF, 3, 5 Select 3 or 5 frames to shoot a rapid series of photos
instead of a single frame when SNAP is pressed
(in normal still photo mode). To cancel, enter this
mode again and select OFF.
Sto (USB Mass Select "Sto" to access the internal or card memory
Storage), PC (USB when the camera is connected to a computer with
Camera) the USB cable. "PC" allows the camera to be
used as a live USB/PC camera (note that the 8x
magnification and lack of close focus capability
limits usefulness in most size rooms)
None-press SNAP Select this mode and press SNAP to delete only the
to delete the last last photo or video you took. The counter will go
photo or video down one number.
10