Master/Slave Operation - Renegade RXA 1200D Manual De Uso

MASTER/SLAVE OPERATION

together as one big monoblock. Please refer to section "MASTER/SLAVE OPERATION / 2 x RXA1200D" on
FIGURES
(P. 34-38)
CONNECTIONS AND CONTROLLERS (FIG. 1)
(1) Power-/Protection-LED
(2) Connector for the included bass level remote controller
(3) LOW PASS controller
(4) BASS BOOST controller
(5) SUB SONIC controller
(6) PHASE SHIFT controller
(7) GAIN controller
(8) LINE INPUT L/R
(9) Mono audio output (OUT MASTER), leading to an additional RXA1200D
Mono audio input (IN SLAVE), coming from an additional RXA1200D
POWER SUPPLY AND TURN ON CONNECTION (FIG. 2)
(1) GND terminal for the ground
(2) REM terminal for the turn on connection
(3) +12 V terminal for the positive-connection of the battery
(4) Vehicle's battery
(5) Inline Fuse (not included in the scope of delivery)
(6) Turn on wire from the head unit or the electrical antenna
(7) Fuses
1-CHANNEL OPERATION MONO / 1 x SUBWOOFER (FIG. 3)
the following setup:
(1) Bass level remote controller
(2) To the head unit, line output left or subwoofer output
(3) To the head unit, line output right or subwoofer output
1-CHANNEL OPERATION MONO / 2 x SUBWOOFERS (FIG. 4)
nect the following setup:
(1) Bass level remote controller
(2) To the head unit, line output rear left or subwoofer output
(3) To the head unit, line output rear right or subwoofer output
12
-
-