Handle Assembly - Domo DO467FR Manual De Instrucciones

DO467FR
PARTS
1. "Reset" button
2. Lid
3. "Power" - indicator
4. Temperature dial
5. Control panel
6. Heating element
7. Oil reservoir
8. Basket
9. Outside casing
10. Ventilation holes
11. "Ready" - indicator

HANDLE ASSEMBLY

1. Hold the handle above the basket as shown below. Gently
press the two arms of the handle towards each other, so that
they fit into the inlets (holes) of the basket and let go of the
arms (arrows).
2. Turn the handle towards the side of the basket. Press the
handle against the side of the basket until it clicks firmly into
place.
INSTRUCTIONS FOR USE
Clean the unit before using it for the first time, as indicated below.
• Remove the lid, take the basket out of the appliance and lock the handle.
• Fill the oil reservoir between the MIN and MAX - markings, approximately 4
litres.
• Place the lid on the appliance and plug the appliance into the electric socket.
• Adjust the temperature dial (4) to the desired temperature, the "Power On"
indicator (3) will light up.
• When the desired temperature is reached the "Ready" indicator (11) will light up.
• Open the lid. Place the food in the basket. The food must be as dry as possible.
Loose remains of ice must be removed first. Lower the basket carefully into the
hot oil and place the lid on the appliance. Watch out for the hot steam that may be
released from the ventilation holes.
• If the temperature drops, or drops when you add food, the "Ready" indicator will
switch off temporarily until the desired temperature has been reached again.
• If frying of the food has been completed, open the lid and use the handle to hang
the basket on the edge of the oil reservoir. Let excess oil drain.
• Then lift the basket up and carefully shake off any possible remains of oil.
• When you have finished frying everything, switch the appliance off by turning the
7
9
3 11
38
8
1
10
5
6
2
2
1
4