Supplied Accessories; Attaching/Detaching The Lens - Panasonic H-FS100300 Instrucciones De Operación

Supplied Accessories

[Inspection to be performed when you unpack
the unit]
When removing the unit from its packing box, check
that the main unit and the supplied accessories are
there and also check their external appearance and
functions to verify that they have not sustained any
damage during distribution and transportation.
If you discover any trouble, contact your vendor
before using the product.
Product numbers correct as of October 2010. These
may be subject to change.
1 2
VFC4601 VYC1016
Lens Storage Bag
1
Lens Hood
2
Lens Cap
3
Lens Rear Cap
4
(The lens rear cap and lens cap are attached to
the interchangeable lens at the time of purchase.)
6
VQT2Z58
3 4
VYF3375 VFC4605

Attaching/Detaching the Lens

≥ Refer also to the camera's operating instructions
for attaching and detaching the lens.
∫ Attaching the Lens
≥ Check that the camera is turned off.
1 Turn the lens rear
cap to detach it.
A: Lens Rear Cap
2 Align the lens fitting
marks B (red marks) on
the camera body and the
lens and then rotate the
lens in the direction of
the arrow until it clicks.
• Do not press the lens release
button C when you attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.