Battery Maintenance And Device Maintenance; Battery Maintenance; Device Maintenance - Multilaser M-PRO Manual Del Usuario

10. BATTERY MAINTENANCE AND

DEVICE MAINTENANCE

10.1. BATTERY MAINTENANCE

(1) This device uses rechargable battery to be as power source.
When power is weak, please charge the battery. In order to maintain
battery life, it is best to run out of battery capacity before charging.
(2) When battery adaptor is still not used, please separate it from
power source. Please connect adaptor with battery for more than one
week. Over-charging will shorten battery life.
(3) Temperature affects battery's limit, so battery needs to cool or
warm for a while before charging. If battery temperature is more than
40 Celsius degrees, battery can not be charged.
(4) Please use battery as original use to avoid causing battery short
circuit. When conductive material directly connect with battery nega-
tive pole, it will cause short circuit.
(5) Don't use damaged battery.
(6) It will cause battery short life if battery is put in extreme cold or
heat places. It may cause device not normal use if battery is exposed in
extreme cold or heat places, even if battery is fully charged.
(7) Don't put battery in fire! Please obey local rules to handle waste
battery.
EN - User´s Manual
97