Installation; Maintenance And Cleaning - Vortice CB LCD W Manual De Instrucciones

ENGLISH

4. Installation

- The circuit support (fig.3) allows for the application of different plaques as shown
in the following table:
4 DENTIN POSITION
USABLE
TO BE BREAKED
PLAQUES
BTicino Light,
Light Tech,
Living
Vimar Plana,
Eikon
Vimar Idea,
Rondò
Gewiss
Playbus,
Playbus Young
Ave Sistema 45,
Banquise, Yes,
Noir, Blanc
VORTICE
- Insert the tube with the cables (fig.5,6).
- Make the connection according to the wiring diagrams (fig.4).
- Make fixing holes for the box as in (fig.7,8,9).
- Fasten the plaque support to the box by means of the supplied screws (fig. 10).
- Affix the plaque by pressing it into the support (fig.11).

5. Maintenance and cleaning

CAUTION!:
All equipment repairs must be carried out by qualified personnel. Improper
repairs can put the user in serious danger. If your equipment needs repair,
contact service assistance.
CAUTION!:
before undertaking any maintenance operations, make sure that equipment
is not and cannot accidentally be powered electrically. Therefore, cut off the
power supply for any maintenance or cleaning.
Fig. 12
Cleaning and maintenance operations must be carried out with the power supply
disconnected or switched off.
14
(fig.4)
X
X
Y
X
NONE
X