Rs-232 Interface - Ecler 2VSP-RS Manual De Instrucciones

(47) CUE/UP key:
 In CD mode: skips to the next track
 TUNER mode: briefly pressing it increases step by step the tuned radio frequency
shown on the display. Maintaining it (1.5 second) launches the upward auto tuning
("scan") to search a frequency, stopping when a valid FM signal is found
(48) FUNCT key: sequentially selects CD/USB/CARD input
(49) CD/TUNER key: selects the CD/USB/SD player or FM tuner as target for the remote control. One of
the LED indicators, (16) or (22), illuminates to indicate which unit is under the control of the remote
control
(50) INTRO key: plays the first 10 seconds of each track
(51) SLEEP key:
 Activates the FM tuner sleep function. Each time you press it, you set the sleep timer
(minutes before turning out) from the following options: 90, 80, 70, 60, 50, 40, 30, 20,
10, OFF (disabled)
(52) MUTE key: mutes the output of the player
(53) RDS key: enables/disables the FM RDS tuner
(54) RANDOM key: enables the random playback mode
(55, 56, 57) SPEED-, SPEED+ and NOR. keys: allow to increase or decrease the tempo (bpm, or "beats
per minute") of track playback. Pressing the NOR. key restores the original tempo of the track (0%
change)

4.5. RS-232 interface

The rear panel DB9 connector allows an external device to remote control the 2VSP-RS via RS-
232. The connection parameters must be: 9600 bauds, 8dB, no parity, 1 stop, no flow.
The following table shows the commands that the 2VSP-RS supports and their related function:
Byte (separation between bytes through
blank space).
0d is equivalent to CR (carriage return)
0a is equivalent to LF (line feed)
CD / USB / CARD COMMANDS
FOLDER SKIP -
FOLDER SKIP +
TRACK DOWN
TRACK UP
STOP
PLAY/PAUSE
EJECT
PROG
ID3 INFO
NOR.
MUTE
REPEAT
FUNCT (CD/USB/CARD SELECTION)
RANDOM PLAY
8
1 2 3
ASCII ASCII ASCII
E A A
E A B
E A C
E A D
E A E
E A F
E A G
E A H
E A I
E A J
E A K
E A L
E A M
E A N
4 5
HEX HEX
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a
0d 0a