Steam Ironing - Brentwood Appliances MPI-60 Manual Del Usuario

Parts:
1.Temperature Control
2.Steam Button
3.Spray Button
4.Spray Nozzle
5.Water Inlet
6.Power Indicator Light
7.Steam Control Knob
8. Sole Plate
9.Body
10. Water Tank
11.Rear Cover
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as
there may be accessory parts contained within the packaging material.
1. Use the lowest temperatures with fabrics that have unusual finishes such as
sequins, embroidery, flush, etc.
2. We recommend passing the iron over an ordinary cloth before using it for the first
time.
3. If the fabric is mixed, set the thermostat to the temperature of the fiber requiring
the lower temperature.
4. If you do not know the composition of the fabric, try testing on a hidden corner of
the garment. Start with a low temperature and increase it gradually until it reaches
the ideal temperature.
5. Never iron areas with traces of perspiration or other marks. The heat of the plate
fixes the stains on the fabric making them irremovable.
Using Your Steam Iron:

STEAM IRONING

Attention: First use may cause a slight odor or small smoking upon heating, it is
normal. This is a result of the heating element chemical reaction. It quickly goes
away.
Filling the Reservoir:
1. Set the steam control knob(7) to "0" and the temperature control dial
(1) to "OFF"
2. Unplug the iron from the wall outlet and wait for iron to cool down.
3. Pour water into the water inlet and fill to the "MAX" level of the water
tank.
7
5
4
8
2
3
1
10
9
4
6
11