Attention: First use may cause a slight odor or small smoking upon heating,
it is normal. This is a result of the heating element chemical reaction. It
quickly goes away.
Quick Start:
1. Fill the aluminum boiler with water.
2. Fill the filter with ground coffee.
3. Attach the coffee container to the base. Plug in and switch the push
button to the ON position.
Using Your Moka Espresso Maker:
WARNING: Hot surfaces.
1. Place the power base on a clean, flat surface.
2. When filling with water, remove your appliance from its power base.
3. According to the number of cups of coffee (for 3-4 persons, max-200
ml.), put a sufficient quantity of cold water.(Figure 3)
4. Replace filter then add desired amount of coffee. Place disc filter on
top. (Figure 4).
5. Reattached pot and turn on appliance and allow to brew for desired
time.(Figure 5).
6. Use caution while serving espresso as the base of pot is extremely
hot.
5