Step 14
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE
INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries can occur
from furniture �pover.
To prevent �pover:
* Install �pover restraint provided
* Place heaviest items in the lowest drawers
* Do not set TVs or
other heavy objects on the top of this product
* Never allow children
to climb or hang on
drawers, door, or
shelves
* Never open more
than one drawer at a
�me
Use of �pover
restraints may only
reduce, but not
eliminate the risk of
�pover
OPTION 1: A�achment into a wall stud (preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracket
aligned in this loca�on. To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm)
through the safety bracket into the stud. Drive the screw through the safety bracket into the wall stud.
OPTION 2: A�achment into drywall
Locate your unit where desired against a wall and mark the wall through the safety bracket, then move
your unit aside. Drill diameter hole 7mm into the wallboard. Tap the wall anchor into the hole
un�l it is flush. Move your unit into loca�on and fasten the wall bracket to the wall anchor with the
screw.
li�leseedskids.com
x1
TWK0031
20
For Masonry, Concrete,
or other wall materials:
Consult your local
hardware store for
appropriate anchors to
securely a�ach the safety
bracket.