Maintenance - Truper LIBA-3X21N2 Manual Del Usuario

Cleaning and care
• Keep the motor housing ventilation slots clean and
uncovered.
• Apply compressed air after each use.
• In case of malfunctioning go only to a
Authorized Service Center
Carbon brush replacement
• Replace worn carbon brushes (burnt, broken or smaller
that 0.19" long). Use new carbons.
• When replacing, both carbon brushes shall be replaced
together.
• Remove worn carbon brushes from the carbon housing.
Remove accumulated dust with compressed air.
• Set the new carbons reversing the order. Carbons shall fit
easily in the carbon housing.
• After setting the new carbon brushes, let the tool run
unloaded 10 minutes to better adjust the carbons.
• Use only original
specifically designed with the hardness and resistance
adequate for each type of motor. Carbons that are out of
specification could damage the motor.
8
ENGLISH
spare carbons

Maintenance