General Instructions; Use Of Accessories; Use; Storage - Imetec E5901 Instrucciones De Uso

Ocultar thumbs

página de 60

/ 60
Contenido
Tabla de contenido
Marcadores

Idiomas disponibles

Refer to page I of the Illustrative Guide to check the contents of the package.

All the figures are found on the inside pages of the cover.

1. Intake filter

2. Technical data

3. Handle

4. Attachment eyelet

The hair dryer is provided with the accessories described above. The accessory is mounted

on the appliance by pressing it onto the front grid (6) of the hair dryer until it is inserted. When

finished using it, the accessory can be removed by pulling it firmly.

Styling nozzle (7)

Use the styling nozzle to direct the air jet as you wish.

IMPORTANT: use only the original accessories of the appliance.

The appliance has various control and function buttons, depending on the model. Refer to Figure

[A] in the illustrative guide of the instructions for use.

Appliance with combined air flow and temperature button (5)

The combined air flow and temperature button allows setting the air flow and temperature at the

following levels:

0 = OFF

1 = high air flow and low temperature

2 = high air flow and medium temperature

When the hair dryer is not used, unplug the appliance from the socket and store it in a dry and

dust-free place.

Do not wind the power cord around the appliance. Coil it up loosely without bending it.

IMPORTANT! Switch the appliance off and unplug it from the socket before

cleaning!

Make sure all cleaned parts are completely dry before reusing the appliance!

Cleaning the appliance and accessories

Clean the appliance and the accessories (diffuser, nozzle) with a damp cloth when needed. Do

not use solvents or other aggressive or abrasive detergents. Otherwise, the surface could be

damaged.

Check the intake opening of the appliance regularly and remove all hair and dust.

Note: the more dust is present in the place where the hair dryer is used, the more often the filter

must be cleaned.

The product is packaged in recyclable materials.

Dispose of these in an appropriate environmentally friendly manner.

Pursuant to European Standard 2002/96/EC, the appliance must be disposed of at the

end of its life span in a compliant manner. This regards recycling useful substances in the

appliance, which reduces the environmental impact. For further information, contact the

local disposal body or the appliance dealer.

To request repairs or purchase spare parts, please contact IMETEC's authorised customer

service centre on the Number below or via the website.

The appliance is covered by the manufacturer's warranty. For details, read the attached warranty

sheet. Failure to comply with the instructions for use and maintenance provided in this manual

will render the manufacturer's warranty null and void.