Connecting The Solar Panels - EcoFlow RIVER MAX 600 Guía De Usuario

Connecting the Solar Panels

The RIVER MAX can support a 10-25V DC input. When the input exceeds 25V, the RIVER MAX
overvoltage protection will be activated. Over voltage may damage the product. Users should
read these instructions carefully because any incorrect use of solar panels that leads to product
damage will void the EcoFlow warranty.
How to Recharge the RIVER MAX Using Solar Panels
For full step-by-step instructions about how to connect RIVER MAX with solar panels, please refer to the Solar
Panel User Guide.
1. Recommend Charging Method
Users can connect a solar panel as shown in Example 1. DO NOT attempt to connect more than one solar panel
in series.
1. Connect to EF MC4 to XT60 solar charge cable. Connect the XT60 connector to the RIVER MAX's XT60 input
port to charge the device. Users can connect up to 2 sets of solar panels in parallel to the MC4 port as shown in
Example below.
2. If you want to connect 2 pieces of solar panels, connect them with our solar MC4 parallel connection cable.
Con- nect the XT60 connector to the RIVER MAX's XT60 input to charge the device. The parallel connection ca-
ble is an optional accessory that is purchased separately.
Note: The EcoFlow Solar MC4 Parallel Connection cable is an optional accessory that needs to be purchased
separately. The charging methods below are with respect to using the EcoFlow 110W Solar Panel.
Charging Method 1
RIVER MAX Charging Port
XT60 Connector
MC4 Connector
RIVER MAX
SOLAR PANEL-21.6V
Power A Free Life
8