Publicidad
5.
Retighten the flanged socket head screws and nuts.
6.
Refit the side vac-forms and pedals.
8-9 Replacing the Chain
1.
Remove the pedals and crank arms.
2.
Remove the side vac-forms.
3.
Disengage the chain by turning the chain wheel in the direction of arrow 2
while pulling the chain toward you (in the direction of arrow 1).
4.
Engage the chain with the chain wheel of the work load unit and between
the pedal chain wheel and sensor sprocket. Turn the pedal chain wheel
clockwise until the chain is fully engaged.
5.
Adjust the tension of the chain.
6.
Redit the side vac-forms and pedals.
(see section 8-6 page 63)
(see section 8-7 page 65)
(see Section 8-7 page 65)
Page 66
Publicidad
