Tabla de contenido
Publicidad
6-3-3-5 Lamp Test
1.
Select 'LAMP TEST' from the I/O Test Screen. The following screen
is displayed:-
DIP 4
LINK
LAMP TEST
VIEW CHANGE OFF
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
(a) The View Change lamp will turn On or OFF each time the Enter
switch is pressed, and the display will change from OFF to ON.
6-3-4 Monitor Test
1.
Select "MONITOR TEST" on the menu screen to test and adjust the
Monitor. The following screen is displayed.
2.
Use the Select Up/Down switch to choose the required item then press
the Enter button. To return to the Monitor Test Menu from a test pattern
press the Enter button.
3.
Select "EXIT" and press the Enter button to return to the menu screen.
GRADATION PATTERN
CROSSHATCH PATTERN (CRT)
CROSSHATCH PATTERN (PROJ)
WHITE WINDOW (H)
WHITE WINDOW (M)
WHITE WINDOW (L)
INTERLACE PATTERN
VIEW ANGLE ADJUST (CRT)
VIEW ANGLE ADJUST (PROJ)
FULL WHITE
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
Note: Items (c) and (i) are not used on this game.
I/O TEST
12345678 [ON:RED]
ON 04+1
MONITOR TEST
Page 53
............................................ (a)
..................................... (a)
..................................... (b)
..................................... (c)
..................................... (d)
..................................... (e)
..................................... (f)
..................................... (g)
..................................... (h)
..................................... (i)
..................................... (j)
Publicidad
Tabla de contenido
